简体中文繁體中文EnglishDeutschFrançaisEspañol日本語한국어Tiếng Việt
Hotline020-32389086
Products

Metal Forming

Covering stamping, drawing, cold heading, wire drawing and die-casting release — higher yield, longer die life.

FORMING
All ProductsCutting & Rolling21Hydraulic & Guide10Gear & Drive4Metal Forming13Rust Prevention & Heat Treatment8Specialty Oils12

Metal FormingStamping · Drawing · Cold heading · Die casting

13 models

Covering stamping, drawing, cold heading, wire drawing and die-casting release — higher yield, longer die life.

  • Suited for stainless / carbon steel rolling and stamping
  • Excellent annealing cleanliness and strip surface quality
  • Long service life with reliable roll-bearing protection
Metal Forming
MetaDL Form 102/103 Cold Heading Oil

DL Form 102/103 Cold Heading Oil

Blended from oily, anti-wear and rust-inhibiting additives with mineral oil — good lubricity and EP performance for cold extrusion forming of steel parts.

Get Selection Advice
Aluminum alloysDL Form 104 Non-Ferrous Stamping Oil

DL Form 104 Non-Ferrous Stamping Oil

Oily and anti-wear additives in refined mineral oil, especially for stamping of non-ferrous metals and aluminum alloys — effectively extends tool life and improves surface quality; non-corrosive and easy to clean.

Aluminum alloys
Get Selection Advice
Stainless steelDL Form 106 Stainless Steel Drawing Oil

DL Form 106 Stainless Steel Drawing Oil

Oily, anti-wear and rust-inhibiting additives with mineral oil — outstanding lubricity and EP performance protect surface quality and extend die life, for stamping of steel and stainless steel.

Stainless steel
Get Selection Advice
MetaDL Form 1005W Fully Synthetic Heavy-Duty Forming Fluid

DL Form 1005W Fully Synthetic Heavy-Duty Forming Fluid

Composed of high-efficiency rust inhibitors, lubricant additives and surfactants — stable, lubricating and rust-preventing with excellent washability. For grinding, milling, honing and heavy-duty cutting of ferrous metals; the high-viscosity concentrate can be used as a water-washable oil for ferrous forming.

Get Selection Advice
≤140°CDL Form 101W-1 Aluminum Foil Stamping Fluid

DL Form 101W-1 Aluminum Foil Stamping Fluid

Blended from special lubricants, rust inhibitors and deionized water — excellent lubrication and cooling. Residues wash off with water or bake off above 140°C. Replaces volatile aluminum-fin stamping oils for air-conditioner fins, improving stamping efficiency, surface finish and tool life while effectively reducing VOC emissions.

≤140°C
Get Selection Advice
MetaDL Form 101W-2 Copper Tube Bending Fluid

DL Form 101W-2 Copper Tube Bending Fluid

Special lubricants, rust inhibitors and deionized water — excellent lubrication and cooling for air-conditioner copper tube bending. Protects surface quality and die life while effectively lowering VOC emissions.

Get Selection Advice
MetaDL HCR 8A Copper Tube Bending Lubricant

DL HCR 8A Copper Tube Bending Lubricant

A copper-tube bending lubricant with outstanding lubricity, good volatility, no residue and low odor — refined from oily, anti-wear and corrosion-inhibiting additives with base oils. For air-conditioner copper tube bending; protects surface quality and extends die life.

Get Selection Advice
MetaDL HCR 8B Aluminum Fin Stamping Lubricant

DL HCR 8B Aluminum Fin Stamping Lubricant

An aluminum-fin stamping lubricant with outstanding lubricity, good volatility, no residue and low odor — also for copper blanking and tube bending. Protects surface quality and extends die life.

Get Selection Advice
MetaDL Form 105 Synthetic Wire-Drawing Fluid

DL Form 105 Synthetic Wire-Drawing Fluid

A synthetic lubricating and cooling fluid for metal wire-drawing operations — contact Dourland for detailed datasheets.

Get Selection Advice
Aluminum alloysDL TK 2001 Aluminum Alloy Die-Casting Release Agent

DL TK 2001 Aluminum Alloy Die-Casting Release Agent

A release agent dedicated to magnesium/aluminum phone mid-frames, ultra-thin parts and brackets. Free of HAP, PAHS and heavy metals, compliant with the latest RoHS and REACH standards. Excellent cooling, flow lubrication and heat insulation — castings form quickly with uniform, smooth, defect-free surfaces that do not affect post-processing, washing or conversion coating.

Aluminum alloys
Get Selection Advice
Aluminum alloysDL TK 2002 Die-Casting Aluminum Release Agent

DL TK 2002 Die-Casting Aluminum Release Agent

For machines above 1,000 tons, large complex parts and core-pulling components. HAP/PAHS-free, compliant with the latest RoHS/REACH standards and ISO 16949 production quality — used for engine blocks, engine housings, oil pans, gearbox housings, hubs and more.

Aluminum alloys
Get Selection Advice
≤300°CDL TK 2003 Aluminum Alloy Release Agent

DL TK 2003 Aluminum Alloy Release Agent

Water-based, blended from high-temperature film-forming materials and multiple emulsifiers. Strong adhesion to hot die surfaces with a heat-resistant lubricating film — for aluminum die casting at mold temperatures above 300°C.

≤300°CAluminum alloys
Get Selection Advice
≤350°CDL TK 2004 Magnesium Alloy Die-Casting Release Agent

DL TK 2004 Magnesium Alloy Die-Casting Release Agent

A water-based magnesium die-casting release agent with outstanding lubricity, high-temperature stability, film-forming ability and low residue, blended from water, heat-resistant film-forming materials and emulsifiers. For magnesium die casting at mold temperatures around 350°C.

≤350°CMagnesium alloys
Get Selection Advice

Can't find the right model?

These are our standard models for this series. For more models and custom formulations, contact our engineers — selection advice within 24 hours.

Get Selection Advice All Products

Need professional selection advice?

Tell us your process and materials — selection advice within 24 hours

Contact Us Browse Products